Menu
Close menu

Calibration services from RISE

Service / Metrology

UCATT – Urban Combat Advanced Training Technology Standards

Gain complete confidence that your weapon-firing simulators and target simulators meet the highest standards. We offer accredited testing according to SISO-STD-016-00-2016, ensuring that your systems operate smoothly and reliably with those from other manufacturers.
Service / Metrology

State of the art gas measurements and diagnostics in furnaces

At RISE we are developing and implementing state of the art measurement and diagnostic techniques with tunable diode lasers to monitor and enhance the performance of thermochemical conversion processes. The techniques enable real-time, accurate measurements of difficult-to-quantify entities in hot…
Service / Metrology

Certification of accessory devices to taximeters

On the Swedish market, there is a requirement (STAFS 2022:1, 4§ 3) that a taximeter must be connected to an additive device manufactured on the basis of a valid STAFS 2022:2 certificate. RISE is an accredited certification body for certifying additive devices for taximeters according to STAFS 2022:…
Service / Metrology

Calibration of Conductivity Meters

Regular calibration of conductivity meters ensures that electrical conductivity measurements are accurate and reliable. By comparing instrument readings with known standard solutions at specific temperatures, accurate results are ensured for all applications.
Service / Metrology

Moment of inertia measurement

RISE offers a method to estimate moment of inertia experimentally using a tri-filar pendulum. The moment of inertia can be measured with respect to selected axes of rotation. In addition, the complete inertia tensor of the body can be estimated through a series of measurements around multiple axes …
Service / Metrology

Fröken Ur

With ‘Fröken Ur,’ (Miss Time) you get the correct Swedish time read directly over the phone. You can reach 'Fröken Ur', from Sweden, at the phone number 90 510. It costs the same as a regular phone call.
Service / Metrology

Modular evaluation of measuring instruments

RISE is an accredited certification body for assessing parts of a measuring instrument according to WELMEC Guide 8.8, and can in this capacity issue Parts Certificates and Evaluation Certificates regarding components and accessories to measuring instruments.
Service / Metrology

CE marking of non-automatic weighing instruments, NAWI

Non-automatic weighing instruments, NAWI, placed on the European common market must bear the CE mark to demonstrate compliance with the essential requirements of directive 2014/31/EU. As a Notified Body, RISE is entitled for assessing a NAWI and to issue the documents that the manufacture…
Service / Metrology

CE marking of measuring instruments, MID

Measuring instruments placed on the European common market must bear the  CE mark to demonstrate that they complies with the essential requirements of directive 2014/32/EU. RISE is a Notified Body for assessing a variety of measurement instruments. In its capacity as Notified Body, RISE is ent…
Service / Metrology

Analysis with TEM

With the help of TEM, materials can be analysed on the nanometer- to micrometer-scale, which can be useful either as a complementary technique or as preparation and sample screening before experiments at large scale research infrastructure facilities. 
Service / Metrology

In-situ scanning electron microscope

The in-situ SEM is a unique and cutting-edge advanced analytical technique to investigate microstructrutal properties. The technique can be used to explore new sustainable processes that will lead to a lower carbon footprint. 
Service / Metrology

Thermal Conductivity Measurement Using Slug Calorimeter

Do you want to characterize a material regarding its thermal conductivity or thermal transport parameters at high temperatures? We can measure effective thermal conductivity up to 1 100 °C
Service / Metrology

Thermal Conductivity Measurement using THW-method

Different fluids and pastes have different thermal conductivities at different temperatures. We perform thermal conductivity measurement on different fluids as well as oils, coolants, colloidal suspensions, aerogels, etc
Service / Metrology

Certification of measuring instruments based on OIML recommendations

For measuring instruments there are international recommendations, issued by OIML (International Organization of Legal Metrology). RISE is appointed as an Issuing Authority for a number of these recommendations and can in that role issue OIML certificates. An OIML certificate can be used in an appl…
Service / Metrology

Measurement of carbon 14 (C 14)

There is currently a transition from fossil-based materials to products based on renewable materials. This transition has led to a need to control the proportion of a material that comes from renewable sources, i.e. is biogenic. We can offer C 14 / Carbon 14 analysis of various materials such as fu…
Service / Metrology

Combined tensile and torsion tester

Combined torsional and axial (tensile & compression) loading capabilities with customized grips and clamps. Ideal machine for advanced packaging testing with complex load cases.
Service / Metrology

Calibration block

Calibration blocks, or moisture content blocks, are used to check moisture content meters.
Service / Metrology

Tomography

Would you like to know more about the 3D-structure of your material on the micro- to centimeter scale? Would you like to peek into the inside of your product without destroying it or taking it apart? We offer non-destructive imaging through our lab-based X-ray microscope in 2D, 3D (tomography) and …
Service / Metrology

Calibration and measurement in a CMM

The National Laboratory for Length and Dimensional Metrology offers calibration and measurements of objects in a coordinate measuring machine.
Service / Metrology

Internal pressure test

RISE can offer internal pressure testing according to different standards or testing customized according to the client’s needs. The pump system available at RISE has a capacity of 2000 bar.
Service / Metrology

Fatigue testing of materials and components

Fatigue testing is carried out with a cyclic load, until breakage occurs. The purpose is to determine the fatigue life and strength of a material or component. We perform both standardized and specialized fatigue testing on materials and components, for both machinery and products for construction …
Service / Metrology

Calibration gas flow

We offer accredited calibrations on most of the air flow meters on the market (including gas clocks) in a flow range from 0.5 ml / minute up to 2.4 m³ / s, at atmospheric pressure. This range corresponds to mass flows between 0.01 mg / s and 2.9 kg / s.
Service / Metrology

Thermogravimetric Analysis and Differential Scanning Calorimetry

By simultaneous assessment of calorimetric (energy flows) and gravimetric (mass changes) measurements we can characterize the response of a material when heated or exposed to different gases.  With our 'Simultaneous Thermal Analyzer' (STA F3 Jupiter) we conduct simultaneous differential scanni…
Service / Metrology

Calibration of laboratory sieves.

We provide accredited calibration of laboratory sieves according to ISO 3310-1 (metal wire cloth sieves) and ISO 3310-2 (perforated metal plate sieves). The calibration is carried out in our accredited laboratory in Borås, Sweden.
Service / Metrology

Thermal Conductivity Measurements TPS method

We measure thermal conductivity (i.e. heat conduction) using the Transient Plane Source (TPS) method according to ISO 22997-2 for which we are an accredited laboratory. The TPS method can be used to measure the thermal conductivity, diffusivity  and the specific heat capacity on solids, liquid…
Service / Metrology

High Resolution Surface Topography measurement

Paper surface roughness plays a crucial role for printability and visual appearance. Several types of instruments are available topography measurements of paper surfaces in different degrees of detail. The FRT MicroProf instrument has the advantage of combining high resolution with a large scanning…
Service / Metrology

3D-scanning and geometrical analysis

ATOS is an optical 3D-scanning system for non-contact measurement of details for digitisation and geometry analysis. The system enables conversion of three-dimensional surfaces to point clouds and after further processing to CAD models.
Service / Metrology

Dynamic deformation analysis

ARAMIS is a non-contact optical 3D measuring system. The system analyses, computes and documents object deformations, rigid body movements and the dynamic behavior of measuring objects. This type of measurement provides deformation data over entire surfaces unlike conventional strain gauges.
Service / Metrology

Atomic Force Microscopy (AFM)

Atomic Force Microscopy (AFM) allows for studying nanoscale surface and interfacial properties of your product or application. For example, surface morphology, topography, nanomechanical surface properties, intermolecular and surface forces, adhesion, nanotribology i.e. friction, lubrication and w…
Service / Metrology

Large-scale product testing in extreme climates

In our large climate chambers, we can expose products to a variety of climates. This is to verify function and service life.
Service / Metrology

Calibration density

The Laboratory for volume and flow offers calibration of density on solid objects, portable density meters, pycnometers and areometers.
Service / Metrology

Measurement of Young's modulus with Impulse Excitation Technique (IET)

The impulse excitation technique (IET) is a non-destructive material-characterization technique to determine the elastic properties and internal friction of a material up to 800 °C. It measures the resonant frequencies to calculate the Young's modulus, shear modulus, Poisson's ratio and internal fr…
Service / Metrology

Torque calibration

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / Metrology

Accredited inspection body for electricity meters

RISE is an accredited inspection body for household electricity meters (category 1 energy measurement systems).
Service / Metrology

Calibration of temperature

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / Metrology

Calibration of differential pressure sensors and manometers

We perform accredited calibration of differential pressure sensors and manometers in a range of ±20 kPa.
Service / Metrology

SAXS/WAXS/GISAXS measurements on nanostructured materials

Are you curious about the nanostructure of your material? We offer characterization on nanoscale level of materials by SAXS, WAXS and GISAXS measurements at our laboratory beamline. Depending on the material type, the material characterization involves analysis of size, shape, periodicity, porosity…
Service / Metrology

Calibration of Concrete presses

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / Metrology

Dimensional calibration - length

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / Metrology

Pressure gauge calibration

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / Metrology

Electrical Instruments calibration

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / National Metrology Institute

Calibration of torque at The National Laboratory

The National Laboratory of Force and Torque offers calibration of torque.
Service / National Metrology Institute

Calibration of force measuring equipment at The National Laboratory

The national Laboratory of Force and Torque offers calibration of force transducers, load cells, measuring brackets, dynamometers and crash sensors.
Service / Metrology

Measurement and Analysis of Surface Texture

Is the surface according to the specifications? What changes in the surface texture are the effect of a process change? What differences are there in the surface texture of one surface compared to another? How is the surface texture affected by wear? Questions as these can be answered by performing…
Service / Metrology

Calibration of heat flux meters

- Temporarily out of service -
Service / Metrology

Testing of aerodrome lighting and signs

Accredited classification of aerodrome lighting and signs in accordance with ICAO annex 14. 
Service / National Metrology Institute

Calibration of colour meters at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of colour meters.
Service / Metrology

Calibration of inductance

The national Laboratory for electrical quantities offer calibration of inductance standards and various types of instruments, such as bridges, LCR-meters and inductive voltage dividers.
Service / Metrology

Calibration of capacitance

The national Laboratory for electrical quantities offer calibration of capacitance standards (capacitance and dissipation factor) and different kinds of instruments. For example, electrometers, calibrators, and LCR-meters.
Service / Metrology

Calibration of electric current

The National Laboratory for electrical quantities offers calibration of current measuring and current generating instruments, for example multimeters, electrometers and calibrators.
Service / Metrology

Calibration of electric voltage

The National Laboratory for electrical quantities offers calibration of voltage standards, voltage dividers, and various forms of voltage measuring and voltage generating instruments. For example multimeters and calibrators.
Service / National Metrology Institute

Calibration glossmeters & gloss standards at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of glossmeters and gloss reference standards.
Service / Metrology

Calibration of power quality instruments

We offer calibrations for power quality parameters such as voltage, current and power for non-sinusoidal signals.
Service / Metrology

Calibration of electrical power

We offer calibration of all types of power meters, wattmeters or converters (transducers).
Service / National Metrology Institute

Calibration of spectroradiometers at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of spectroradiometers.
Service / Metrology

Calibration of electricity meters and reference electricity meters

We offer calibration of all types of electricity meters and reference electricity meters.
Service / National Metrology Institute

Calibration of flowmeters at The National Laboratory

The National Laboratory for Volume and Flow offers calibration of different types of flowmeters.
Service / Metrology

Calibration of tapping machines

Tapping machines are used as sound source at tests within building acoustics.
Service / Metrology

Calibration of accelerometers

RISE is calibrating most types of vibration transducers. The transducer can be calibrated separately or together with its conditioning unit.
Service / Metrology

Calibration of sound level meters

RISE is verifying most types of sound level meters and sound analysers. 
Service / Metrology

Calibration of sound calibrators

RISE is calibrating all types of sound calibrators
Service / National Metrology Institute

Calibration of optical materials at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of optical materials.
Service / Metrology

DSWM - Sampling Wattmeter

We are pleased to be able to provide for purchase our top-of-the-line power measuring system for power quality. Either as a complete system or as parts of a system. We can also provide advice or knowledge transfer. Please feel free to contact RISE Measurement Technology for further information.
Service / Metrology

Testing and certification of electricity meters

We offer testing and certification of electricity meters according to Swedish, European and international standards.
Service / Metrology

Testing of high voltage equipment

We offer comprehensive testing of high voltage products, components and materials.
Service / National Metrology Institute

Calibration standards for form measurements at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration of form standards intended for use with form measuring devices.
Service / National Metrology Institute

Calibration of line scales at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration of line scales.
Service / National Metrology Institute

Calibration of measuring equipment on-site (National Laboratory)

The National Laboratory for Length and Dimensional Metrology offers calibration of measuring equipment on-site.
Service / National Metrology Institute

Calibration of step gauges at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration of step gauges.
Service / National Metrology Institute

Calibration of surface roughness standards at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers measurement of surface texture and calibration of surface roughness standards.
Service / Metrology

RISE arranges intercomparisons for quality assurance

Intercomparisons and skills testing are a common way of determining the performance of a laboratory. It is used by laboratories and companies to ensure technical competence and ensure the quality of measuring equipment and design.
Service / National Metrology Institute

Calibration of Pyrometers at The National Laboratory

Calibration of IR Pyrometers, Optical Pyrometers, Black Body Radiators and Tape Lamps.
Service / National Metrology Institute

Fixed Point Calibration at The National Laboratory

The National Laboratory for Temperature offers fixed point calibration of resistance thermometers and thermocouples.
Service / National Metrology Institute

Calibration of Pressure Balances at The National Laboratory

The National Laboratory for pressure and vacuum performs calibration of pressure balances. This is the most accurate and complex calibration performed and is done according to current standards and guides.
Service / National Metrology Institute

Calibration of vacuum gauges at The National Laboratory

The pressure and vacuum National Laboratory performs calibrations of all types of vacuum gauges. Calibration at the National Laboratory always guarantees the highest possible traceability in the measurements performed.
Service / National Metrology Institute

Calibration of Pressure Transducers at The National Laboratory

The National Laboratory for pressure and vacuum performs gauge and absolute mode calibrations on all types of pressure transducers. Calibration at the national measurement site always guarantees the highest possible traceability in the measurements performed.
Service / National Metrology Institute

Calibration of temperature instruments at the National Laboratory

The National Laboratory for Temperature provides comparative calibration of resistance thermometers and thermocouples.
Service / Metrology

The Swedish National Cluster Sampling of Electricity Meters, ELSA

RISE manages the control system for electricity meters (ELSA), i.e. cluster sampling tests and reporting of faulty electricity meters, on behalf of Energiföretagen Sverige, the industry organization for Sweden's electricity grid companies.
Service / National Metrology Institute

Calibration of flow measurement in field (The National Laboratory)

The National Laboratory for Volume and Flow offers calibration of flow measurement in field
Service / National Metrology Institute

Calibration of control weights at The National Laboratory

Determination of mass for weights according to OIML's system in accuracy class E1, E2, F1, F2, M1 and M2
Service / National Metrology Institute

Calibration of volume standards at The National Laboratory

The National Laboratory for Volume and Flow offers calibration of different kinds of volume vessels, such as volume normals, pipettes and tanks.
Service / National Metrology Institute

Calibration of measuring wheels at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration of measuring wheels.
Service / National Metrology Institute

Calibration of angles at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration of both artefacts and instrument. Some examples are stock squares, try squares, carpenter’s squares, squareness standards made of diabase or steel, universal protractors, protractors, digital protractors, water levels a…
Service / National Metrology Institute

Calibration of setting masters and gauges at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration of varying types of setting masters, for example rings, threads and gauges.
Service / National Metrology Institute

Calibration of customised dimensional references

The National Laboratory for Length and Dimensional Metrology offers calibration of customised references.
Service / National Metrology Institute

Calibration of length gauges at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration high precision length gauges with a resolution down to 0,01 micrometres.
Service / National Metrology Institute

Calibration of laser rangefinders at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration of laser rangefinders.
Service / National Metrology Institute

Calibration of measuring tapes at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration of measuring tapes, dipping tapes and PI tapes.
Service / National Metrology Institute

Calibration of gauge blocks at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers interferometric and mechanical calibration of gauge blocks.
Service / Metrology

Calibration of high voltage and high current equipment

We perform all types of calibration services for high-voltage and high-current equipment, with the lowest possible measurement uncertainty. Services are performed in our high-voltage laboratory or on-site worldwide.
Service / Metrology

Testing of luminous flux for light sources

Accredited testing of luminous flux for lamps, light sources and luminaires. 
Service / Metrology

Testing of light distribution for luminaires or lighting fixtures

Accredited testing of the light distribution of luminaires or lighting fixtures and the creation of photometric data files. 
Service / Metrology

Test of sports surfaces

RISE offers a wide array of different tests to ensure the quality of sports surfaces for producers, suppliers and users.
Service / Metrology

Calibration of electrical resistance

The National Laboratory for electrical quantities offers calibration of resistance standards and various types of other instruments, such as calibrators, multimeters, LCR meters and certain types of temperature measuring instruments.
Service / National Metrology Institute

Calibration of fiberoptic equipment at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of fiberoptic equipment.
Service / National Metrology Institute

Calibration radiometers & optical detectors at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of radiometers, laser power meters and optical detectors.
Service / National Metrology Institute

Calibration of 633 nm HeNe-lasers at The National Laboratory

The National Laboratory for Length and Dimensional Metrology offers calibration of HeNe-Laser sources at 633 nm.
Service / National Metrology Institute

Calibration of light sources at The National laboratory

The National Laboratory for photometry and radiometry offers calibration of light sources for photometric and radiometric applications.
Service / Metrology

Cleanliness test - Technical cleanliness – at RISE

We offer cleanliness measurement, material characterization, and cleanliness audits—key elements in quality assurance. Particles can affect product lifespan and performance. We also provide training in technical cleanliness and support you in improving cleanliness levels in your production.
Service / National Metrology Institute

Calibration of laser interferometer at The National Laboratory

The national laboratory for length and dimensional metrology offers calibration of laser sources used in interferometry.
Service / National Metrology Institute

Calibration of luminance meter at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of any type of luminance meter or photometer.
Service / Metrology

3D measurement with scanning

From digital model to finished product, or vice versa. Optical 3D measurement is often used when analyzing and measuring an existing product or process, or when developing a new product. Measurement technology is contact-free and provides measurement results with extremely high accuracy.
Service / Metrology

Geometry simulation of tolerance requirements

Through geometry simulation we can predict and visualize variation for a better end product. Analyzing variation and tolerance outcomes through efficient geometry simulation creates the right conditions for optimizing product requirements and manufacturing costs.
Service / National Metrology Institute

Calibration of time and frequency via GPS at The National Laboratory

The National Laboratory for time and frequency offers calibration of time and frequence via GPS.
Service / National Metrology Institute

Calibration of stopwatches at The National Laboratory

The National Laboratory for time and frequency offers calibration of any type of stopwatches.
Service / Metrology

Calibration - antennas

Accredited calibration of antennas according to standard ANSI C63.5 (2017) in the frequency range 30 MHz-18 GHz.
Service / Metrology

Testing of magnetic field meters

Testing of magnetic field meters/field probes in the frequency range 5 Hz-1 MHz with field strength up to 10 uT
Service / Metrology

Climatic Environmental Durability

In our advanced climatic test lab, we can perform all types of environmental tests, for example temperature chock, moisture, temperature cycling, submersion, splash water test. We offer accredited testing for a large number of standards (IEC, ISO, MIL, ETSI etc).
Service / Metrology

Calibration - Field measurement equipment

Tracible calibration of electrical field probes/field indicators/ field strength meters in the frequency range 10 kHz-18 GHz
Service / Metrology

Calibration - Antennas

The NMI offers tracible calibration of antennas in the frequency range 30 MHz - 18 GHz for a multitude of different antennas, as for example horn antennas, biconical antennas, dipole antennas. logperiodical antennas and hybrid antennas.
Service / Metrology

Customer website calibration - for your measuring equipment

Calibration is our customer website that gives you control of your measuring equipment. Log in to your own page and see details of all your measuring equipment, the calibration status of each item and the associated calibration certificates. The website gives you complete control of your measuring …
Service / Metrology

SEM with EDX/EDS

Scanning electron microscopy (SEM) is used for imaging of surfaces, prepared cross sections or small details, with the possibility of very high magnifications. Toghether with energy dispersive X-ray analysis (EDX), sometimes referred to as energy dispersive spectroscopy (EDS), the elemental composi…
Service / Metrology

Floorball Equipment

We carry out product certification of Floorball equipment on behalf of the International Floorball Federation (IFF).
Service / Metrology

Residual stress measurements

RISE have expertise in residual stress measurements and analysis of metallic materials. For more than 20 years, we have done assignments for the Swedish automotive and aerospace industry using XRD and hole drilling.
Service / National Metrology Institute

Calibration of pyranometer at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of pyranometers.
Service / Metrology

Project Management of Combined Environmental Durability

It’s often required to complete several vastly different tests to qualify a product. They are rarely unified and usually resources are allocated over a long time period to coordinate the work. The service, combined environmental durability, is available for the clients who has the need to perform t…
Service / Metrology

Laser classification

We perform classifications of all types of lasers i accordance with SS-EN 60825-1.
Service / National Metrology Institute

Calibration of UV-meter at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of UV-meters.
Service / Metrology

Testing of photobiological safety

Accredited classification of product in accordance with SS-EN 62471 Photobiological safety for lamps and lamp systems
Service / National Metrology Institute

Calibration of luxmeter at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of any type of luxmeter or illuminometer.
Service / Metrology

Mechanical Environmental Durability

With its extensive experience of how vibration affects objects, RISE can help the customer to develop and carry out relevant tests and determine how well a design or object can withstand mechanical stress from the surrounding environment. We offer accredited testing for a large number of standards …
Service / Metrology

Environmental Testing

RISE offers a wide range of services in the area of ​​environmental durability. We have services that support the work during the development process as well as during the last qualification of a product to ensure the correct durability.
Service / Metrology

Tensile test of composite material

RISE offers tensile tests of composite material in accordance with prescribed standards. If there is a need for tailor-made testing, the necessary equipment is produced.
Service / Metrology

The DynoMag system and The High Frequency (HF) AC susceptometer

AC susceptometry (ACS) gives information on how fast magnetization is building up in a material. An excitation magnetic field is applied over the sample and the in-phase and out-of-phase susceptibility is measured in a frequency range. Different types of magnetization processes can be measured with…
Service / Metrology

Software in measuring instruments

RISE offers evaluation of software in measuring instruments with regard to risks for incorrect measurements and measured values. The EU Directive for Measuring Instruments (MID) and guidelines from the WELMEC co-operation are the basis for the evaluation work.
Service / Metrology

Payment systems

It is important that payments are registered correctly, reliably and with confidentiality. Payment systems in society continue to evolve. Today we see electronic receipts, payments over the Internet and payments via mobile phone. RISE works with security and reliability in payment systems. Testing …
Service / Metrology

Isothermal calorimetry - Microcalorimetry

Isothermal calorimetry, also known as microcalorimetry can be used to study endothermic or exothermic processes. The instrument measures thermal power from a sample and is especially sutiable for slow reactions e.g., curing or self-heating.
Service / Metrology

Calibration of anemometers

We perform accredited calibration of anemometers in a range from 0.1 m/s to 35 m/s.
Service / Metrology

Verification of weighing instruments and fuel meters.

Verification services cover subsequent verification for virtually all types of weighing instruments, fuel meters and fuel-dispensers, located at your site. Our business is represented throughout the country, from Malmö in the south of Sweden, to Luleå in the north.
Service / Metrology

Coordinating your calibration needs

RISE has a coordinator function for all customer with issues related to calibration. Through this service we can more easily make our range of calibration services available so that you as a customer can have a single entrance for questions about calibration, prices, agreements, quotes and more.
Service / Metrology

Taximeter and accessory device

Taximeters and accessory devices are intended to make shure that the customer can feel safe with the final price after a taxi ride. A taximeter shall calculate the price of the fare based on certain predetermined parameters and the accessory device shall, among other things, print the receipts of t…