Large-scale product testing in extreme climates
In our large climate chambers, we can expose products to a variety of climates. This is to verify function and service life.
This service is also relevant in: Climate adaptation, Production and manufacturing, Materials and durability
Service details
- Service
- Climate simulation in a large climate chamber. Environmental durabilit
- Instrument
- Electricity meters, Flow meters, Air flow / Gas flow, Humidity sensor, Thermometers
- Certifications
- Other Certifications
- Delivery level
- Accredited
- Field measurements
- Available
- Price
- Price on tender
- Preparations
Information about necessary preparations is sent out before the test
Purpose
Climate simulation with extreme climates accelerates development and ensures function to quickly reach the market. At RISE, we have extensive experience of just such tests and can be your support throughout the project. Tests we normally perform in our climatic chambers is:
- High Temperature
- Low Temperature
- Solar Radiation / Solar simulation
- Humidity
- Immersion
- Icing/Freezing Rain
Method
Examples of test methods that can be performed:
IEC
MIL 810
Stanag
Deliveries
Results and analysis are delivered in a report if the customer wishes.
More information
Technical data: Climate chamber
Length: 20.6 m
Width: 6.0 m
Height: 5.5 m
Door: 3.75 x 5.0 m (width x height)
Technical data: Solar simulator
Floor area: 10 × 15 m
Illuminated area: 2.5 × 5.5 m
Ceiling height: About 7.0 m
Entrance: 4.0 × 4.0 m
Capacity:
Irradiance: 500 - 1200 W/m²
Temperature: -50 ° C to +95 ° C
Relative humidity: Between +20 ° C to +50 ° C / 20% RH to 95% RH
Temperature change: 0.5 ° C to 1.0 ° C / min