Menu
Close menu

Services in production and manufacturing

This transition requires new methods and a stronger capacity for change. RISE provides a range of services, including management system certification, strategic maintenance work and practical support for implementing automation and digitalisation.

Service / Construction

Reusing of windows

Reusing windows poses both technical and economic challenges, but the environmental benefits can be significant. By overcoming these challenges, the construction and real estate sector can contribute to a more sustainable future. One option may be to renovate the window in whole or in part. RISE of…
Service / Biobased materials

Manufacturing of nonwovens via solution blowing

Solution blowing is a manufacturing process used to produce nonwoven materials from polymers in solution. The solution is pumped through a spinneret, where high-velocity air is blown concentrically along each spun filament, which is stretched and collected on a drum or in a bath to form a nonwoven …
Service / Metrology

State of the art gas measurements and diagnostics in furnaces

At RISE we are developing and implementing state of the art measurement and diagnostic techniques with tunable diode lasers to monitor and enhance the performance of thermochemical conversion processes. The techniques enable real-time, accurate measurements of difficult-to-quantify entities in hot…
Service / Artificial intelligence

AI for Efficient Industrial Operations

While companies across industry sectors are trying to implement the results of AI research, the developed prototypes rarely scale and reach production level. Through more than 75 industry projects RISE has an extensive understanding of how organizations adopt and integrate AI and how we best apply …
Service / Pulp and paper

Certified Graphic Production (CGP) – ISO 12647

ISO 12647 is an international standard that defines process control for color reproduction in the printing industry. It ensures that printed materials have consistent color reproduction, regardless of where or how they are produced.
Service

Certification of Quality Management Systems – ISO 9001

By obtaining ISO 9001 certification, you demonstrate that you deliver with quality and reliability. It provides assurance for your customers and partners, strengthens business relationships, and shows that you work in a structured way to meet needs and contribute to sustainable development.
Service

Certification of health and safety management systems - ISO 45001

Occupational health and safety management systems are a growing field. Basic requirements such as orderliness, organization and feedback of experience are similar to those of environmental and quality management systems. Therefore, many companies choose to integrate the management systems into a sy…
Service

Certification of Energy Management Systems - ISO 50001

Working with the organization's energy performance is a powerful tool to enhance energy efficiency for the business and reduce energy costs. The energy management system constitutes a stable foundation for continuously improving performance over time.
Service / Metrology

Calibration of Conductivity Meters

Regular calibration of conductivity meters ensures that electrical conductivity measurements are accurate and reliable. By comparing instrument readings with known standard solutions at specific temperatures, accurate results are ensured for all applications.
Service / Pulp and paper

Microbiological Purity of Products in Food Contact

Microorganisms in liquids, paper, and cardboard can cause staining and contamination, impacting both the production process and the final product. In food-related manufacturing, it is particularly important to monitor and control this to ensure high standards of quality and hygiene.
Service / Metrology

Moment of inertia measurement

RISE offers a method to estimate moment of inertia experimentally using a tri-filar pendulum. The moment of inertia can be measured with respect to selected axes of rotation. In addition, the complete inertia tensor of the body can be estimated through a series of measurements around multiple axes …
Service / Pulp and paper

Visual Inspection of Seals for Flexible Packaging

The laboratory at RISE is certified by ISTA and is one of the most well equipped and advanced laboratories in Scandinavia for testing packaging. We carry out tests according to international standards, to ensure the performance of the packaging. Visual inspection is performed to ensure package inte…
Service / Batteries

Adhesion test in batteries

Adhesion tests are crucial to ensure that the electrode coating material does not crack or detach from the current collector during use. These tests help evaluate the adhesion strength and lifespan of electrodes, which is important to prevent battery failures. Common tests include 90° peel tests an…
Service / Batteries

Battery abuse testing

Do you need comprehensive testing of battery cells, modules and full battery packs under real-time conditions? Welcome to benefit from our new built test lab as well as testing, regulations, and standards expertise.
Service / Textiles

Microplastic from textiles

We offer both qualitative and quantitative analysis of microfibres from textile sources, both synthetic (microplastic) and natural.
Service / Food

Safe and hygienic energy solutions for the food industry

Hygiene and safety are central in the food industry, but not always easy to combine with economical use of energy. RISE offers food-safe and hygienic solutions that take into account the impact on product quality when you want to become more energy efficient.
Service / Food

Certification of Food Safety Management Systems - ISO 22000

"A certified food safety management system according to ISO 22000 helps organizations identify and control food safety risks in their production. This can apply to the production of food and packaging, as well as transportation, warehousing, etc."
Service / Circular transition

Remanufacturing – turning circular solutions into business value

Remanufacturing contributes to both sustainability and profitability. We help you identify your opportunities and turn knowledge and experience into practical roadmaps.
Service / Circular transition

ISO standards on circular economy (the 59000 standards)

We help you use the ISO standards that describe the circular economy (published in May 2024). The standards clarify concepts, provide guidance from a business strategic perspective and define how to measure and evaluate circular performance.
Service

Simplified climate declaration for components

You can now provide your company and customers with a competitive edge in a simple and cost-effective manner while contributing to sustainable transport. This method leverages established material and process data to report the climate impact of both current and future production articles.
Service / Plastics

Compounding, injection molding and extrusion of plastics

We have process equipment for compounding, injection molding and extrusion. We perform testing of new material compositions, vary process parameters and prepare samples for evaluation. We offer equipment in the range from lab to pilotscale, providing possibilities for product development and solvin…
Service

Social Symbiosis for Industrial Change

RISE offers the service Social symbios för industriell omställning, which is aimed at municipalities, regions, industrial players, real estate companies, etc. The service is based on the ongoing green industrial transition, which has major effects on local welfare with an increased need for investm…
Service / Plastics

Capillary rheometer

A capillary rheometer is used to measure a material's flow properties at high shear rates. The results can be used for both material development and to predict a suitable processing window in extrusion, injection moulding, or fibre spinning.
Service / Biobased materials

Wet spinning

Wet spinning is a manufacturing process used to produce fibers from polymer solutions by extruding them into a coagulation bath, where the polymer solidifies into fibers. This method is called "wet" spinning because the process involves the use of a liquid coagulation bath.
Service / Textiles

Development of filament and staple fibers

Man-made fibers produced using solution spinning are collected and processed as filament or staple fibers depending on the desired application. RISE has equipment and knowledge to develop these two types of fibers that can be further converted into yarns and threads.
Service / Textiles

Development of dopes for wet and air-gap spinning

An essential step in solution spinning is the development of spinning dopes (polymer solutions) with optimal properties. Precise control over dope properties is essential for ensuring proper extrusion and coagulation, thereby laying the foundation for a well-functioning solution spinning process fo…
Service / Textiles

Air-gap spinning

Air-gap (dry-jet wet) spinning is a method used for man-made fiber production. In this method, a polymer solution is extruded through a spinneret and travels through an air gap before entering the coagulation bath. Air gap allows better polymer orientation prior to its solidification compared to we…
Service / Textiles

Post processing of textile fibres

RISE in Mölndal offers a broad expertise within post processing of textile fibres, from different raw materials and for different end uses.
Service / Construction

CE marking of construction products (CPR)

Do you need CE marking and declaration of performance under the Construction Products Regulation (CPR)?With CE marking and declaration of performance, manufacturers of construction products can sell and gain market access in Sweden and other EU/EEA countries, Switzerland and Turkey. CE marking enab…
Service / Metrology

Modular evaluation of measuring instruments

RISE is an accredited certification body for assessing parts of a measuring instrument according to WELMEC Guide 8.8, and can in this capacity issue Parts Certificates and Evaluation Certificates regarding components and accessories to measuring instruments.
Service / Metrology

CE marking of non-automatic weighing instruments, NAWI

Non-automatic weighing instruments, NAWI, placed on the European common market must bear the CE mark to demonstrate compliance with the essential requirements of directive 2014/31/EU. As a Notified Body, RISE is entitled for assessing a NAWI and to issue the documents that the manufacture…
Service / Design

Scanning and interaction for Extended Reality and virtual environments

We help you create life in virtual environments and Extended Reality (XR) solutions, from scanning environments to building interactive solutions.
Service / Batteries

Climate testing of batteries – Battery testing

Climate testing of batteries is performed to evaluate or determine that a battery can operate in and handle different climates. These tests are essential to ensure battery performance and to fulfil specific requirements for the battery's intended use.
Service / Metrology

CE marking of measuring instruments, MID

Measuring instruments placed on the European common market must bear the  CE mark to demonstrate that they complies with the essential requirements of directive 2014/32/EU. RISE is a Notified Body for assessing a variety of measurement instruments. In its capacity as Notified Body, RISE is ent…
Service / Composites

Formability limits of aluminum sheet metal

Thermo-mechanical experiment to measure the formability of aluminum sheet metal through the Forming Limit Curve (FLC) according to the Nakajima test procedure
Service / Composites

Tensile test of aluminum sheet metal

Thermo-mechanical uniaxial tensile test of aluminum sheet metal
Service

Strengthen your organization with Smart Maintenance

Technology development moves forward at a rapid pace and can create opportunities to predict maintenance needs and thereby reduce the risk of costly breakdowns. But what development of the maintenance organization is required to take full advantage of the technology and save time and costs? Let RIS…
Service / Physical protection and safety

CE-marking, lifting accessories and lifting machinery

Lifting accessories and lifting machinery are covered by the Machinery Directive, 2006/42/EC and shall be CE marked. For certain types of lifting accessories, there are harmonised standards that can be followed to meet the requirements of the Machinery Directive.
Service / Pulp and paper

Analyses of deposits

Deposits, stickies, scales and contaminations in the pulp mills often causes disturbance and loss of efficiency in the processes and affects the quality of the final products.
Service / Corrosion

Accelerated Corrosion tests with corrosive gas

Corrosion tests with corrosive gases are used when the corrosive atmosphere not solely is constituted of moisture and salts but also inorganic aggressive gases. The ambient environment is usually not only constituted of inorganic gases but also moisture and salts. In these cases, RISE may use both …
Service / Artificial intelligence

Quality inspection and process monitoring using computer vision

RISE has expertise in both cameras and computer vision, which can be used in industrial applications for automating quality inspection and process monitoring.
Service / Textiles

Resistance to snagging according to ASTM D3939/D3939M-13 (2017)

Snagging is defined as loops of yarn/fibres on the surface of woven or knitted fabrics that occur when the material comes into contact with a sharp/prickly object. When we use textiles in different areas, there is a risk that they will come in contact with sharp objects, which can cause loops to b…
Service / Concrete and cement

Addition for concrete

Tests for mechanical, physical and chemical properties on ground granulated blast furnace slag, pigments and fly ash to concrete according to EN 15167-1, EN 12878, EN 450-1, SS 137003 and AMA Anläggning. We also perform product audits / monitoring in the above-mentioned areas against the Constructi…
Service / Pulp and paper

Bleaching of Cellulose

By understanding the bleaching process and making the necessary adjustments and optimisations, the pulp and paper industry can produce high-quality products with the desired properties and durability. This not only helps to fulfil customer requirements and expectations, but also reduces environment…
Service / Circular transition

EMAS (The EU Eco-Management and Audit Scheme)

An environmental management system registered according to EMAS provides conditions for effective and systematic environmental work that adds value to the organisation and its customers. The requirement to externally communicate their environmental performance development increases an organisation’…
Service / Composites

Simulation of composite processes

The anisotropic properties of composites create challenges in manufacturing when dimensional accuracy and mechanical properties are critical. Simulations are used for optimization of process concepts and to minimize time for tool try-out at the start of production.
Service / Pulp and paper

Evaluation of the strength of pallets

The laboratory at RISE Packaging Excellence Centre is one of the most well equipped and advanced laboratories in all of Scandinavia. We specialize in simulating various transport and storage conditions to ensure that your pallets are strong enough.
Service / Corrosion

Hydrogen embrittlement – Slow strain rate testing

Metallic materials exposed to a hydrogen atmosphere can exhibit degradation of their mechanical properties during their service life due to hydrogen embrittlement. Slow Strain Rate Testing (SSRT) in hydrogen atmosphere is a mechanical testing method that evaluates loss of ductility in metallic mate…
Service / Batteries

Design and optimization of plastic/composite materials for batteries

It is important to choose compatible polymers that can withstand metal salt solutions or strong acids/bases depending on the battery system. We can help in this process by advising and testing polymer compatibility under a range of conditions.
Service / Batteries

Mechanical testing of battery components

In mechanical testing of battery components and battery cases, we test the effect of mechanical impact to ensure that the design is suitable for its application.
Service / Food

Trouble shooting microbiological deviations

Sometimes things goes wrong in the production and the products are microbiologically spoiled or even worse pathogens are detected in the products. Then it is important to know how to handle the situation to establish why it occurred, what to do about it and how to prevent it happening again. RISE …
Service / Batteries

Determination of water content in electrode material

The water content needs to be as low as possible in all materials included in a Li-ion battery build. The water content of the solid electrode sheets can be determined with our Karl Fischer set-up.
Service / Batteries

Water content determination in battery electrolytes

Water is an impurity in Li-ion electrolytes. This is because water reacts, breaks down, important components such as the active salt LiPF6. Control of production and recycling processes towards low water levels is of great importance. We offer analysis of water content in, among other things, keton…
Service / Textiles

Spinnability evaluation of new polymer materials

RISE in Mölndal conducts research and development of textile fibres, with a special focus on material transition for a sustainable development. Melt spinning poses certain requirements on the material, including high temperature stability and suitable flow properties. We can evaluate the spinnabili…
Service / Textiles

Pilot scale melt spinning of multi-component textile fibres

At RISE in Mölndal, we offer pilot scale melt spinning R&D services for textile fibres. Our unique facility enables the development of multi-component fibres from thermoplastic, biobased and recycled polymers – supporting companies and researchers in creating innovative and sustainable textile mate…
Service / Pulp and paper

Measurement of washboarding

Measurement of the unwanted washboarding on corrugated cardboard is done to check that it does not exceed an acceptable level.
Service / Pulp and paper

Mechanical measurement on paper, corrugated board and cardboard

Standard and non-standard measurement on paper, cardboard and corrugated cardboard. The lab has a standardized climate of 23 degrees Celsius and 50% rh.
Service / Pulp and paper

Efficient Evaluation of Antifoam Solutions in the Process Industry

By utilizing the customer's filtrate or other process fluids, we can efficiently evaluate various antifoam solutions without the need for extensive and costly full-scale trials.
Service / Wood technology

Heartwood and Grain Angle On-Line

Reduce drying time and improve board shapes by measuring heartwood content and relative grain angle. We help you provide your customers with boards of better quality at a greater profit while saving energy and improving your productivity at the same time.
Service / Textiles

Characterisation of viscose fibre

Fibre characterisation such as linear density, fibre strength or tenacity and elongation of staple fibres and filaments from viscose show the mechanical properties of the fibre.
Service / Infection control

Microbiological risk assessment of product, process and production

Many processes and production environments must be clean and hygienic for the product to be safe and durable. It is also important that process steps and equipment designed to reduce unwanted microorganisms function properly. RISE offers a number of services and tools to improve microbiological saf…
Service / Wood technology

Simulate the wood drying process with Torksim or Torksim LC

Simulate the outcome from changes in either the raw material or in the drying process itself with DrySim. You save time and money and minimize risks that come with full scale tests.
Service / Materials and durability

Hydrogen embrittlement testing with step loading - ASTM F1624

Metals exposed to hydrogen can after some time suffer from hydrogen embrittlement, which will result in a significant reduction of strength in the material. The step loading technique in ASTM F1624 allows that a test for evaluating a material´s susceptibility to hydrogen embrittlement can be perfor…
Service / Metrology

Tomography

Would you like to know more about the 3D-structure of your material on the micro- to centimeter scale? Would you like to peek into the inside of your product without destroying it or taking it apart? We offer non-destructive imaging through our lab-based X-ray microscope in 2D, 3D (tomography) and …
Service / Metrology

Calibration and measurement in a CMM

The National Laboratory for Length and Dimensional Metrology offers calibration and measurements of objects in a coordinate measuring machine.
Service / Composites

Tensile testing of metallic materials

A method to determining the mechanical properties such as e.g. yield strength, ultimate strength and elongation under static loading. The testing can be carried out using either flat or cylindrical test specimens that are in line with the relevant standard.
Service / Metrology

Internal pressure test

RISE can offer internal pressure testing according to different standards or testing customized according to the client’s needs. The pump system available at RISE has a capacity of 2000 bar.
Service / Metrology

Fatigue testing of materials and components

Fatigue testing is carried out with a cyclic load, until breakage occurs. The purpose is to determine the fatigue life and strength of a material or component. We perform both standardized and specialized fatigue testing on materials and components, for both machinery and products for construction …
Service / Metrology

Calibration gas flow

We offer accredited calibrations on most of the air flow meters on the market (including gas clocks) in a flow range from 0.5 ml / minute up to 2.4 m³ / s, at atmospheric pressure. This range corresponds to mass flows between 0.01 mg / s and 2.9 kg / s.
Service / Service innovation

Project room for product development

RISE model for project room provides efficient product development with visual methods to guide and follow up product development work
Service / Corrosion

Accelerated Corrosion Testing - Salt Mist and Condensation

Factors like temperature, contaminations, moisture and rain have a destructive effect on most materials. The durability of materials and products can be estimated by accelerated testing under controlled conditions.
Service / Materials and durability

Thermal expansion

To ensure that a choice of material is correct throughout the temperature range of the product, it can be important to know the thermal expansion. With our equipment we can measure the thermal expansion and calculate the coefficient of thermal expansion on materials or entire systems.
Service / Metrology

3D-scanning and geometrical analysis

ATOS is an optical 3D-scanning system for non-contact measurement of details for digitisation and geometry analysis. The system enables conversion of three-dimensional surfaces to point clouds and after further processing to CAD models.
Service / Metrology

Dynamic deformation analysis

ARAMIS is a non-contact optical 3D measuring system. The system analyses, computes and documents object deformations, rigid body movements and the dynamic behavior of measuring objects. This type of measurement provides deformation data over entire surfaces unlike conventional strain gauges.
Service / Metrology

Atomic Force Microscopy (AFM)

Atomic Force Microscopy (AFM) allows for studying nanoscale surface and interfacial properties of your product or application. For example, surface morphology, topography, nanomechanical surface properties, intermolecular and surface forces, adhesion, nanotribology i.e. friction, lubrication and w…
Service / Wood technology

Roof trusses and punched metal plate connected structures

RISE performs inspections and tests trusses and helps with certification and CE marking according to EN 14250. As a manufacturer of wooden houses and wooden house components, you can be certified against RISE certification rule CR065 (see Related at the bottom), you can also test your constructions…
Service / Metrology

Large-scale product testing in extreme climates

In our large climate chambers, we can expose products to a variety of climates. This is to verify function and service life.
Service

Plasma surface modifications

Plasma surface modification is an efficient and environmentally safe method for improvement of different materials surface properties. The surface of all solid materials can be modified. RISE uses the method for cleaning of surfaces, increased adhesion to paints, lacquers and adhesives, preparation…
Service / Textiles

Open end yarn spinning - rotor spinning

RISE has an equipment that can make yarn from textile fibres and create staple fibre yarns. This method is called Open End or rotor spinning and is suitable for short fibres. We have different kinds of rotors that fits different kinds of fibres and several blends.
Service / Risk and security

Safety and Exposure - Cleaning in Production Units

We offer an multidisciplinary capacity to secure the working environment in connection to cleaning processes in food industry and other industries
Service / Food

Avoid Process Downtime & Problems - Analyze Your Cleaning Processes

We offer complete mapping of energy, chemicals, water, time and other key parameters associated with cleaning and washing in industrial processes.
Service / Food

Clean - and with a small footprint

By mapping out your cleaning process we identify the most environmentally effective improvement actions.
Service / Food

Cleaning and disinfection - Comparison of techniques

We offer the possibility to compare the effect of your current cleaning and disinfection with new alternatives.
Service / Food

Cleanability of process equipment

If a process equipment is easily cleaned it will be a big advantage when assuring a hygienic production and minimizing the total cost for use. Getting the equipment clean is as vital as making sure that the cleaning process is not too time consuming.
Service / Wood technology

Strength graded structural timber

RISE tests, certifies and performs production control on strength graded structural timber
Service / Pulp and paper

Measurement of print-through

Print-through is an unwanted effect when you see some of the ink from the opposite side of a paper in a magazine. It is a combination of the show-through (=effect from opacity) and the strike-through (=effect from ink penetration), both properties are closely related to the paper structure
Service / Composites

Dimensional stability

RISE measures how material moves with regard to humidity and temperature variations.
Service / Wood technology

Testing of fasteners for timber constructions

Testing of fasteners for determination of load-bearing capacity prior to CE marking or other purposes.
Service / Wood technology

Certification rule CR065 - Certified house production

As a third party RISE performes inspection of design and manufacturing to verify the quality at factory built wooden houses. For more information regarding Säker Vatten inspection, se below.
Service / Metrology

Measurement of Young's modulus with Impulse Excitation Technique (IET)

The impulse excitation technique (IET) is a non-destructive material-characterization technique to determine the elastic properties and internal friction of a material up to 800 °C. It measures the resonant frequencies to calculate the Young's modulus, shear modulus, Poisson's ratio and internal fr…
Service / Metrology

Torque calibration

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service

Finite element (FE) analyses of various manufacturing processes

Finite element analyses of thermomechanical manufacturing processes to predict the behavior of sheet material components, i.e. thinning, springback, final geometry, temperature, etc. Studies in forming, welding, and joining are performed in various materials, such as high-strength steels, aluminum,…
Service / Metrology

Calibration of temperature

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / Metrology

Calibration of differential pressure sensors and manometers

We perform accredited calibration of differential pressure sensors and manometers in a range of ±20 kPa.
Service / Metrology

Dimensional calibration - length

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / Metrology

Pressure gauge calibration

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / Metrology

Electrical Instruments calibration

The field-calibration department is a complement to RISE National Laboratories and contributes to the effective calibration services offered by RISE. The field-calibration resources are primarely intended to meet the need of accredited and traceable calibrations of instruments, which are used direc…
Service / National Metrology Institute

Calibration of torque at The National Laboratory

The National Laboratory of Force and Torque offers calibration of torque.
Service / National Metrology Institute

Calibration of force measuring equipment at The National Laboratory

The national Laboratory of Force and Torque offers calibration of force transducers, load cells, measuring brackets, dynamometers and crash sensors.
Service / Materials and durability

Semi-industrial testing - cutting of sheet metal

Testing of tool material with different heat treatments and hardening methods (tool concepts) against different sheet metal qualities.
Service

Semi-industrial testing - forming of sheet metal

Testing of tool material with different heat treatments and hardening methods (tool concepts) against different sheet metal qualities.
Service / Materials and durability

Load and reload of sheet materials

A uniaxial tensile test which load, unload and reload up to specific intervals of strain levels. This test provides the information of the elasticity modules strain dependence of the material. Results provides valuable information for forming simulations.
Service / Composites

Characterisation of sheet metal material

Complete material characterization package which includes several tests, for example tensile tests and viscous bulge test for testing sheet metals.
Service / Materials and durability

Cyclic test of sheet metal.

Cykliskt test av plåtmaterial monterat i fixtur i dragprovsmaskin för att mäta hysteresis effekten av kraft mot läge.
Service / Materials and durability

Viscous Bulge test - biaxiell strain measurement of sheet metals

Mätning av biaxiella töjningar genom viscous bulge provning.
Service / Materials and durability

Tensile test of sheet metal

Standard uniaxial tensile test of sheet metal performed at room temperature or at elevated temperatures up to 1000°C.
Service / Metrology

Measurement and Analysis of Surface Texture

Is the surface according to the specifications? What changes in the surface texture are the effect of a process change? What differences are there in the surface texture of one surface compared to another? How is the surface texture affected by wear? Questions as these can be answered by performing…
Service / Composites

Forming Limit Curve FLC

Experiment to measure the materials formability/plasticity FLC by deep-drawing of several geometries according to Nakazima test. The strains are measured continuously using the Digital imaging system ARAMIS.
Service / Physical protection and safety

CE marking of personal protective equipment, PPE

Personal protective equipment placed on the common market must be CE marked as ensurance that it complies to the requirements of Regulation (EU) 2016/425. RISE is a Notified Body according to the regulation for assessing a variety of equipment and can issue the documents that the manufacturer needs…
Service

ivf SmartQuench for control of cooling curve measurement

The ivf SmartQuench system, also known as the quenchometer, is your professional choice to ensure and optimise the performance of your quenching system. The ivf SmartQuench is developed and owned by RISE.
Service / Circular transition

Environmental product declaration, EPD

An environmental product declaration is a way of communicating the environmental properties of products that can be used on all kinds of goods and services. Environmental product declarations in accordance with ISO 14025 are based on life cycle assessment, LCA.
Service / National Metrology Institute

Calibration of colour meters at The National Laboratory

The National Laboratory for Photometry and Radiometry offers calibration of colour meters.