Forming Limit Curve FLC
Experiment to measure the materials formability/plasticity FLC by deep-drawing of several geometries according to Nakazima test. The strains are measured continuously using the Digital imaging system ARAMIS.
This service is also relevant in: Metrology, Production and manufacturing
Service details
- Service
- Forming limit curve according to Nakazima test
- Standards
Test is based on the standard ISO/DIS 12004-2.
- Price
- Price on tender
- Delivery time
According to agreements.
- Preparations
The rolling direction should be clearly marked on the test material.
Purpose
Using a measuring method with high efficiency and quality provides the material's formability. Test how the sheet deforms/strains in different directions before a crack appears.
Method
The stamping tests are conducted using a hydraulic press with a capacity of 1200 tons with a specially manufactured tool för FLC measurements. Measurements are done with seven geometries according to Nakazima geometries to assure a good forming limit curve. The measurements are conducted using ARAMIS which is an optical 3D deformation measuring system that analyzes, calculates, and documents strains. ARAMIS measures displacements of a stochastic pattern on the surface which is sprayed on with an aerosol, the measurement window is 0.01% up to several 100%. ARAMIS measures the deformation using two digital cameras continuously during the forming tests, providing a continuous strain map of the sample until crack.
Deliveries
Results delivered according to the agreements.