Emissions of various gaseous compounds and particles is inevitable in many workplace processes. RISE offer sampling and chemical analysis of airborne compounds and particles in workplace assessments and in laboratory experiments.

Air quality is affected by airborne gaseous compounds and particles and poor air quality may cause adverse health effects. We offer workplace assessments of chemical hazards through sampling of volatile compounds and dust for evaluation and comparison with occupational exposure limits, (OELs) or DNELs (sv hygieniska gränsvärden).

Measurement of air quality in workplace settings may offer valuable information for a company´s future work with occupational health and safety including choice of safety equipment and solutions for ventilation to minimize exposure.

Among species that we can measure by sampling/analysis or using direct reading instruments; VOC (e.g. organic solvents), PAH, acids, ozone, isocyanates, quartz and other dust, oil mist/cutting fluid, allergens etc. Most analysis are made in-house, which is very valuable.

A written digital report is obtained in English or Swedish.

Delivery of report according to agreement.

For workplace assessments a pre-visit may sometimes be preferred and most valuable.

We work mainly with standardized methods for airborne compounds (ISO, EN, NIOSH, OSHA). RISE Research Institutes of Sweden AB, Chemistry and Applied Mechanics is accredited as a testing laboratory according to ISO/IEC 17025:2017 (Accreditation certificate nr 1002).

The use of lubricating grease on moving parts is essential to save energy and to diminish friction and wear. Since the grease used is consumed and may leak to the environment it is vital to use an environmentally adapted grease, especially in outdoor applications. Therefore, a Swedish standard has been drawn up that sets environmental requirements.

The examination done by RISE covers the environmental properties of lubricating greases in accordance with section 5.2 of Swedish standard SS 155470. From an international perspective, the environmental requirements, as given in Section 5.2 in the standard, are rigorous and signify that the base fluid in the lubricating grease should be biodegradable, with minimal aquatic toxicity. Further an examination of chemical compounds with sensitising properties is required.

 The standard does not include any technical requirements as the performance is specified based on the area of application, but information about the technical properties, etc., of the lubricant is available from the suppliers. The products on the list are used in a wide range of applications, including universal lubrication, rail lubrication, lubrication for heavy forestry machinery and, in central lubrication systems for trucks and other vehicles.

Historically, the list has been called the "SP list" and was established by the project "Ren Smörja", which was started by the City of Gothenburg in 1998 in consultation with the Swedish Chemicals Agency (KEMI). These criteria have been elaborated and are now a part of the Swedish Standard "Lubricating Grease – Requirements and Test Methods – SS 155470". After an international hearing the standard was issued in 2002 and the official English version 2004. 

Expertise at RISE examines products regarding the environmental requirements in Swedish standard 155470, "Lubricants, industrial oils and similar products (Class L) Specifications for family X (Lubricating grease)". 

The examination is based on documentation that the client of the review is responsible for providing. The technical performance level is set by the standard and is fulfilled by self-claim by the manufacturers.

RISE also examines hydraulic fluids, and that list is available here.

The list is only published in pdf format on this website and is protected by copyright, which means that it may not be published in its entirety or as an excerpt without citation of source.

The list, which is only published in pdf format here, is protected by copyright, which means that it may not be published in its entirety or as an extract without indicating the source.

The current list of lubricating grease that meets the environmental requirements of Swedish standard SS 155470 can be downloaded via the link on the right.

SS 155470

Hydraulic Fluids are used to transfer power in the hydraulic systems of various machines such as forest machines, excavators, trucks, cranes, etc. However, leakage of these fluids may have an environmental impact. That’s why a Swedish Standard has been compiled with, among other things, environment requirements on Hydraulic Fluids.

The major cities in Sweden, as well as the Swedish transport administration require that hydraulic fluids used meet the environmental requirements in Swedish standard SS 15 54 34 when procuring contracts that concern areas where precautionary measures are required (for example land below the groundwater level, drinking water sources and environmental protection areas).

RISE offers an examination of the environmental properties of hydraulic fluids according to the above-mentioned standard. Approved hydraulic fluids are published on the "SP list" which can be downloaded on the right.

A prerequisite for listing is that the hydraulic fluid also meets the technical requirements specified in the standard, but these are not covered by the review. According to the review agreement, however, RISE has the right to demand documentation that shows that the technical requirements are also met. RISE can also remove products that do not meet the requirements from the list with immediate effect. Information on technical properties is provided by the respective supplier/manufacturer. Changing the product must always be done in consultation with the machine manufacturer and the supplier of the hydraulic fluid.

From an international perspective, the environmental requirements are strict and mean that the hydraulic fluid must be biodegradable, have minimal negative impact on the water environment and not contain too high levels of allergenic substances as well as carcinogenic, reproductive toxic and mutagenic substances (CMR substances).

RISE also reviews the environmental properties of lubricating greases according to SS 15 54 70, that list is available here.

The review is based on information about the chemical content of the hydraulic fluid, and it is the customer (usually the supplier/manufacturer of the product) who is responsible for ensuring that all required documentation is available.

Hydraulic fluids that meet environmental requirements are added to the list of approved products. The list ("SP list") is only published on this website and is protected by copyright, which means that it may not be published in its entirety, or as an extract without reference to the source. The list is updated continuously, but at most every calendar month. It is the list most recently published on the website that is valid.

SS 15 54 34

Examples of organic substances are additives such as dyes, biocides, surfactants, preservatives, consistency sensors, flame retardants (in, for example, plastics and electronics), plasticizers (phthalates) or other additives in plastics and rubber.

The results of the analyzes can be compared against different EU directives (eg. REACH, RoHS and the toy directive, cosmetics regulation) and different chemical lists (SinList, TEDX etc.) to determine whether the material / product contains CMR (carcinogenic, mutagenic, reproductive toxicants) substances, SVHC substances (Substances of Very High Concern) or classified as PBT / vPvB substance (Persistent, bioaccumulative and toxic / very persistent and very bioaccumulative).

Some functional chemicals that have been noted for environmental reasons include PCBs, PAHs, phthalates, perfluorinated substances (PFOA / PFAS), Bisphenol A (BPA) and various volatile and / or odoriferous substances.

Functional chemicals of biological origin can sometimes vary slightly in composition or being sensitive to heating or otherwise affecting the molecular structure. Therefore, quality control and other characterization of biomolecules place high demands on the laboratory.

Organic substances can be detected in various media such as water, tissues, biomull, particles, waste, air or other gas mixtures as well as in different materials and goods. The substances often occur in very low levels.

RISE has several advanced instruments for detecting, characterizing and quantifying organic substances, including:

• UV-VIS-NIR spectrometer with integrating sphere

• Infrared wavelength range (FTIR) spectrometer

• Liquid chromatographs (LC) with various detectors (MS-MS, UV, RI)

• Gas chromatographs (GC) with different detectors (MS, ECD, FID, TCD)

• XRF, surface layer analysis of a material's elemental composition

The work include both accredited and non-accredited testing methods. The scope of accreditation is available upon request – please feel free to contact us for more information.

Delivery according to agreement and continuous dialogue with the customer.

5-15 working days from samples arrived RISE

Please contact us for price information

With hydraulic fluids, power is transferred in many different types of vehicles and work machines, for example in forestry, construction and port operations. The use of hydraulic fluid helps to save energy.
However, hydraulic fluid can inadvertently leak into the environment. Therefore, a Swedish standard (SS 15 54 34) has been drawn up which, among other things, sets environmental requirements for hydraulic oils.

To determine whether a hydraulic fluid meets the environmental requirements based on chemical composition based on analysis with FTIR and GCMS.

The hydraulic fluid is analyzed with FTIR and GCMS and compared against references on the so-called "SP-list" and other references that may be considered relevant.

Delivery according to agreement and continuous dialogue with the customer.

5-15 arbetsdagar från prov ankommit RISE

We offer advanced analyses of solid fuels, ashes and waste to assess their quality, environmental impact and potential uses.

Solid biofuel analysis assess the composition, quality and energy content of the fuel to ensure efficient and sustainable use. By analyzing factors such as ash content, moisture content and calorific value, we help optimize the performance of the biofuel for heating, power generation and other applications, while ensuring that it meets environmental requirements and regulations.

Analyses are performed according to international standards to measure parameters such as ash content, calorific value, moisture content, heavy metals and more.

The work include both accredited and non-accredited testing methods. The scope of accreditation is available upon request – please feel free to contact us for more information.

Report in Swedish or English.

Normal delivery time is approximately 5-15 business days.

Price upon request for quotation.

• Drying, sample preparation and grinding are performed as needed.
• The customer is responsible for taking a representative sample in a sealed sample container.
• Hazardous materials must be correctly labeled on the packaging with UN number and pictogram.

For methods and standards follow the link under More information .

It is important that the textiles on the market are free of harmful and regulated substances. Chemical analysis is a way to gain control over the products' chemical content.

Society and consumers set high demands on companies and their products. The legislation also means that you as an actor must have complete information and control over the chemicals in your product. It is especially important with products for children and goods with skin contact, such as clothes and accessories.
Aprotic solvents such as DMFa, NMP and NEP are commonly used in polyurethane coatings (PU coatings) of textiles, gloves and "faux leather". The substances are also used in the manufacture of elastomers such as elastane, as well as in the manufacture of aramide fibres (kevlar). The concentrations can be kept down in the end product, but often occur more or less in the materials.

We help you interpret chemical legal requirements and restrictions that apply to goods made of textile materials and plastics and that are linked to e.g. REACH and POPs. We suggest what analyses you need to do based on legal requirements, but also other specifications such as eco-labels or procurement requirements

EN 16778. Protective gloves — Determination of dimethylformamide (DMF) in gloves

EN 17131. Textile and textile products — Determination of dimethylformamide (DMF) by gas chromatographic method

OEKO-TEX analysis method

Sample amount 20 grams

Written report in Swedish or English

After order and arrival of sample material - normal delivery time 10 working days

We perform chemical resistance tests on vehicle components, sinks and other surfaces and materials

We can perform tests that are included in test programs and specifications for vehicle components, kitchen sinks ect. and also stain tests on indoor paints. We cooperate within RISE to offer a complete test program.

When it comes to vehicle components in different environment, chemical loads are often performed according to SS-ISO 16750-5 as a part of a larger test program.

On sinks, which should stand against a tuff environment in a kitchen, we perform stain tests with several types of chemicals according to SS-EN 13310, also as a part of a larger test program.

Comparative stain tests on indoor paint according to SS-EN ISO 2812-4 are also performed.

We perform our tests in our labs in Borås.

You receive a report for each part in a test program or a specific report for a certain test. The test chemicals are specified in the report and pictures taken during observations are enclosed on an USB-memory or directly in a digital report.

Please contact us for price information

The customer prepares the test items unless otherwise agreed

SS-ISO 16750-5

SS-EN 13310

SS-EN ISO 2812-2

SS-EN ISO 2812-4