Menu
Close menu

Services in fire safety

RISE offers testing, certification and consulting services that ensure your products and designs meet fire safety requirements. From materials and components to complete systems, we help you document safety and comply with regulations.

Service / Risk and security

Certified Engineer for Water Sprinkler Systems SBF 1018

By certifying individuals according to the standards of the Swedish Fire Protection Association we contribute to a safer and more fire-secure society. Our certifications ensure that professionals working with fire safety systems possess the necessary competence and experience. This increases safety…
Service

Certified Engineer for Water Mist Systems SBF 2019

By certifying individuals according to the standards of the Swedish Fire Protection Association we contribute to a safer and more fire-secure society. Our certifications ensure that professionals working with fire safety systems possess the necessary competence and experience. This increases safety…
Service

Certified Engineer for Voice Evacuation Alarm Systems SBF 2017

By certifying individuals according to the standards of the Swedish Fire Protection Association, we contribute to a safer and more fire-secure society. Our certifications ensure that professionals working with fire safety systems possess the necessary competence and experience. This increases safet…
Service

Certified Engineer for Gas Extinguishing Systems SBF 1001

By certifying individuals according to the standards of the Swedish Fire Protection Association, we contribute to a safer and more fire-secure society. Our certifications ensure that professionals working with fire safety systems possess the necessary competence and experience. This increases safet…
Service

Certified Fire Alarm Engineer SBF 1007

By certifying individuals according to the standards of the Swedish Fire Protection Association and the Swedish Theft Prevention Association, we contribute to a safer and more secure society. Our certifications ensure that professionals working with fire and security systems possess the necessary c…
Service

Inspection Company for Fire Protection Systems SBF 1003

Company certification under SBF 1003 for inspection of fire protection systems is a vital tool for ensuring quality and competence among companies performing inspections of such systems.
Service

Installation Company for Water Sprinkler Systems SBF 1020

Company certification under SBF 1020 for water sprinkler systems is a vital tool for ensuring quality and competence among companies that install these systems.
Service

Installation Company for Water Mist Systems SBF 2020

Company certification under SBF 2020 for water mist systems is a vital tool for ensuring quality and competence among companies that install these systems.
Service

Installation Company for Voice Evacuation Systems SBF 2018

Company certification under SBF 2018 for voice evacuation systems is a vital tool for ensuring quality and competence among companies that install evacuation alarms with spoken messages.
Service

Installation Company for Kitchen Fire Suppression Systems SBF 2025

Company certification under SBF 2025 for kitchen fire suppression systems is a vital tool for ensuring quality and competence among companies that install these systems.
Service

Installation Company for Fire Alarms SBF 1008

Company certification under SBF 1008 for fire alarm installation is a vital tool for ensuring quality and competence among companies that install fire alarm systems.
Service

Fire gas analysis using the steady-state tube furnace

ISO/TS 19700 - Controlled equivalence ratio method for the determination of hazardous components of fire effluents – Steady-state tube furnace
Service / Corrosion

Corrosion evaluation of sprinkler pipes

RISE offers a evaluation of a sprinkler system's pipe parts due to corrosion, for example as part of the 25-year check according to Appendix K in SS-EN 12845:2015+A1:2020 and section 20.6 in SBF 120:8. By checking the status of the sprinkler pipes, a lifetime estimate is carried out.
Service

Support for cleaning PFAS-contaminated firefighting equipment

When transitioning to PFAS-free extinguishing agents, there is a risk that the new, fluorine-free extinguishing agent becomes contaminated due to PFAS remaining in the system. It is therefore important to clean the system before refilling and to ensure adequate cleaning.
Service / Batteries

Fire testing of batteries - battery testing

The purpose of fire testing of batteries is to investigate the safety and performance of a battery under various conditions. This is a kind of safety-critical testing that often leads to severe fire and, in some cases, explosion.
Service / Batteries

Thermal propagation – battery testing

Thermal propagation is when an increase in temperature in one part of a battery leads to a chain reaction where the temperature rises rapidly throughout the battery. This implies a major security risk.
Service

RISE Fire DataBase

Get free access to unique measurement data from fire technical research projects in different product areas. Export and use data for theses, research projects, in product development, as a basis for calculations and much more.
Service

Fire resistance tests for non-load-bearing walls and fixed windows

The construction must be able to withstand a fully developed fire and prevent the fire from spreading between, for example, two apartments.
Service

SP FIRE 105 – Fire test for facade

Meet the fire requirements in the BBR for facade systems in multi-storey buildings through the method SP FIRE 105. A full-scale method where the facade is exposed by an apartment fire that escapes out through a window opening. RISE offers testing at our fire lab in Borås, where our world-leading sm…
Service

Fire resistance tests for doors, windows, gates, and shutters

The products must be able to withstand a fully developed fire and prevent the fire from spreading between, for example, an apartment and a staircase.
Service / Wood technology

Testing of board material

RISE tests boards for non-load-bearing purposes and load-bearing boards for constructive use in walls, floors and ceilings and performs manufacturing inspections in production plants. We also have our own method for testing of step through safety that has been developed to meet the Swedish Work Env…
Service

Is your old wood good enough?

EN 16755 - Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications.
Service

Jet fire test

We have a long experience in jet fire testing and has been involved in the development of several jet fire test standards used by the industry and the authorities today. Our facility enables testing of complex combinations of one or several jet fires with varying heat flux levels.
Service / Physical protection and safety

Test of cryogenic spill protection

As the first laboratory in the world, we now offer testing of insulation materials that have been exposed to cryogenic spillage. We offer customized tests documenting the materials' resistance.
Service / Textiles

SS-EN ISO 6941

This method is used to evaluate flame spread properties of vertically oriented textiles such as curtains, drapes, apparel textiles etc by measuring the burning time.
Service

Test of fire extinguishment systems

We offer standardized testing of extinguishing installations like sprinkler, water mist systems, gas systems and foam systems for land based, offshore- or maritime applications.
Service

Testing of photoluminescence and phosphorecent materials

RISE offers testing of photoluminescence materials which are used as marking for example emergency exit in buildings, ships and aircrafts. The material is charged by ambient light and will in event of a power failure light up and provide opportunity to find emergency exits despite darkness.
Service

Gathering Tents

Tents intended for 150 people and more must be inspected and approved in accordance with the order act for use at public gatherings (e.g. religious practice, theatre, circus) and public events (e.g. sports, dance, carnivals, markets).
Service

Fire test of materials for upholstered furniture according to TB 117

TECHNICAL BULLETIN 117-2013. Requirements, Test Procedure and Apparatus for Testing the Smolder Resistance of Materials Used in Upholstered Furniture.
Service

Testing of fireplaces and chimneys

We offer testing of fireplaces and chimneys according to a number of standards.
Service / EMC

Electronic products in railway vehicles

Investigation of products according to EN 45545-2 - Railway applications - Requirements for fire behaviour of materials and components. Subclause 4.3 - Grouping rules.
Service / Batteries

Thermal runaway in battery cells

Thermal runaway is a stage of rapid self-heating of the battery cell that in the worst case can result in a fire or explosion. Abuse testing of batteries causes thermal runaway and is tested for product development purposes or product approvals in an open or closed reactor.
Service

Testing of flame spread according to SS-EN ISO 15025

This method describes the testing of flame spread properties with a small defined flame. The test is performed on flexible materials such as textiles, coated textiles and leather. The method is primarily used for materials for protective clothing.
Service / Metrology

Calibration of heat flux meters

- Temporarily out of service -
Service

Sprinkler testing

RISE can offer testing of sprinkler system components and fire performance testing of sprinkler systems in accordance with relevant ISO- and EN-standards. We can also offer consultation with regards to hazard classification and testing to determine the commodity classification of goods.
Service

Field sampling testing of sprinklers

RISE is offering field sampling testing of sprinklers in accordance with Annex K of EN 12845:2015+A1:2020 and the requirements in NFPA 25
Service

Fire testing of cables according to EN 60332-1-2

Tests on electric and optical fibre cables under fire conditions – Part 1-2: Test for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW pre-mixed flame.
Service

Fire test of cables for trains EN 60332-3-24

EN 60332-3-24 is a fire test method whose test results form the basis for fire classification according to EN 45545-2 "Fire protection on railway vehicles – Part 2: Requirements for fire behaviour of materials and components".
Service

EN 61034-2 Smoke density of electric cables burning

EN 61034-2 is a fire test method that generates data that is used to evaluate formed smoke density as cables burn. Test results forms a part of the basis for CE marking according to the CPR Construction Product Regulation.
Service

Fire testing of cables EN 50399

EN 50399 is a fire test method that generates data used to evaluate the fire characteristics of cables in terms of flame spread, power generation, smoke formation and burning droplets. The test results forms a part of the basis for CE marking according to the CPR Construction Product Regulation.
Service

Acidity in flue gases from cables EN IEC 60754-2

EN IEC 60754-2 is a fire test method that generates data used to determine the acidity in fire gases from the combustion of cable material. Test results forms a part of the basis for CE marking according to the CPR Construction Product Regulation. Fire testing according to EN IEC 60754-2 also mee…
Service

ConeTools - Development tool for Euroclasses according to EN 13501-1

ConeTools - Development tool for predicting test results according to SBI (Single Burning Item) and RCT (Room Corner Test).
Service

Fire testing according to ISO 5660-1

ISO 5660-1 Reaction-to-fire tests - Heat release, smoke production and mass loss rate. Part 1: Heat release rate (Cone calorimeter method) and smoke production rate (dynamic measurement).
Service

ISO 5660-1 Fire testing of products in trains

ISO 5660-1 – Reaction-to-fire tests - Heat release, smoke production and mass loss rate Part 1: Heat release rate (Cone calorimeter method) and smoke production rate (dynamic measurement)
Service / Maritime

IMO 2010 FTPC Part 10, Appendix 2 - Fire testing for ships

IMO 2010 FTP Code, Part 10 - Test for fire-restricting materials for high-speed craft Appendix 2 - Fire test procedures for heat release, smoke production and mass loss rate for materials used for furniture and other components of high-speed craft
Service

Fire resistance testing

RISE offers accredited testing, inspection and certification for a vast variety of fire resistant products at our sites in Borås, Sweden and Trondheim, Norway.
Service / Maritime

IMO 2010 FTPC Part 5 - Fire testing of materials for ships

IMO 2010 FTP Code Part 5 - Test for Surface flammability (test for Surface materials and primary deck coverings)
Service / Mobility

Database for approved materials and products in trains

Welcome to the open access database for rolling stock materials and products classified according to the European railway standard EN 45545-2 – Railway applications – Fire protection on railway vehicles – Part 2: Requirements for fire behavior of materials and components.
Service / Maritime

IMO 2010 FTPC Part 7 - Fire testing of vertical textiles in ships

IMO 2010 FTP Code Part 7 - Test for vertically supported textiles and films.
Service

Tests for fire detection systems intended for engine compartments

Tests for fire detection systems intended for engine compartment according to SP Method 5320.
Service

Fire testing according to FAR/JAR 25.853 (horizontal)

FAR/JAR Part 25- Airworthiness Standard: Transport Category Airplanes Subpart D - Design and construction, Fire protection, §25.853, Appendix F - Part I Aircraft Materials Fire Test Handbook, Chapter 3, Horizontal Test for Cabin, Cargo compartment and Miscellaneous materials.
Service / Plastics

Hose testing

RISE performs tests on almost all types of hoses for many purposes, for example type testing and certification of multi-coiled and form-stable fire hoses for fire posts. The hoses can be certified and also P-marked. Tests are performed according to the manufacturer's own technical regulations …
Service

Tests for fire suppression systems intended for engine compartments

Tests for fire suppression systems intended for engine compartments according to SP Method 4912, UNECE R107, AIS 135
Service

Fire Safety Cabinets for Retail Environments

SP Method 2369 - Protection System for Storage of Inflammable Goods in Retail Environments - Fire Safety Cabinets
Service

BS 6807 - Fire testing of mattresses in UK

BS 6807:2006 - Method of test for assessment of ignitability of mattresses, upholstered bed bases with flaming types of primary and secondary sources of ignition.
Service

BS 7177 - Fire classification of mattresses UK

BS 7177:2008+A1:2011 - Specification for resistance to ignition of mattresses, mattress pads, divans and bed bases
Service / Concrete and cement

Inspection and repair measures for concrete structures

Qualified damage investigations and condition assessments of buildings and facilities are valuable in many contexts, for example in maintenance planning, repair assessments needs in case of damage, valuations, etc.
Service

Fire testing according to FAR/JAR 25.853 (vertical)

FAR/JAR Part 25- Airworthiness Standard: Transport Category Airplanes, Subpart D - Design and construction, Fire protection, §25.853, Appendix F - Part I, Aircraft Materials Fire Test Handbook, Chapter 1, Vertical test for cabin and cargo compartment materials.
Service

IMO 2010 FTPC Part 9 - Fire testing of mattresses in ships

IMO 2010 FTP Code Part 9 - Fire test for bedding components - Ignability.
Service / Maritime

IMO 2010 FTPC Part 8 - Fire testing of upholstered furniture in ships

IMO 2010 FTP Code Part 8 - Fire test of upholstered furniture - Ignitability.
Service

Fire testing according to EN ISO 1716

EN ISO 1716 - Fire technical test of building products, Determination of the gross heat of combustion (calorific value) PCS (MJ/kg).
Service

BS 7176 - Fire classification of upholstered furniture UK

BS 7176:2007+A1:2011 - Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing Composites.
Service

BS 5852 - Fire testing of upholstered furniture in UK

BS 5852:2006 - Methods of test for assessment of the ignitability of upholstered seating by smoldering and flaming ignition sources.
Service

EN ISO 9239-1 - Fire testing of flooring

EN ISO 9239-1 - Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source