Calibration services from RISE

Gain complete confidence that your weapon-firing simulators and target simulators meet the highest standards. We offer accredited testing according to SISO-STD-016-00-2016, ensuring that your systems operate smoothly and reliably with those from other manufacturers.

At RISE we are developing and implementing state of the art measurement and diagnostic techniques with tunable diode lasers to monitor and enhance the performance of thermochemical conversion processes. The techniques enable real-time, accurate measurements of difficult-to-quantify entities in hot…

On the Swedish market, there is a requirement (STAFS 2022:1, 4§ 3) that a taximeter must be connected to an additive device manufactured on the basis of a valid STAFS 2022:2 certificate. RISE is an accredited certification body for certifying additive devices for taximeters according to STAFS 2022:…

Regular calibration of conductivity meters ensures that electrical conductivity measurements are accurate and reliable. By comparing instrument readings with known standard solutions at specific temperatures, accurate results are ensured for all applications.

RISE offers a method to estimate moment of inertia experimentally using a tri-filar pendulum. The moment of inertia can be measured with respect to selected axes of rotation. In addition, the complete inertia tensor of the body can be estimated through a series of measurements around multiple axes …

With ‘Fröken Ur,’ (Miss Time) you get the correct Swedish time read directly over the phone. You can reach 'Fröken Ur', from Sweden, at the phone number 90 510. It costs the same as a regular phone call.

RISE is an accredited certification body for assessing parts of a measuring instrument according to WELMEC Guide 8.8, and can in this capacity issue Parts Certificates and Evaluation Certificates regarding components and accessories to measuring instruments.

Non-automatic weighing instruments, NAWI, placed on the European common market must bear the CE mark to demonstrate compliance with the essential requirements of directive 2014/31/EU. As a Notified Body, RISE is entitled for assessing a NAWI and to issue the documents that the manufacture…

Measuring instruments placed on the European common market must bear the  CE mark to demonstrate that they complies with the essential requirements of directive 2014/32/EU. RISE is a Notified Body for assessing a variety of measurement instruments. In its capacity as Notified Body, RISE is ent…

With the help of TEM, materials can be analysed on the nanometer- to micrometer-scale, which can be useful either as a complementary technique or as preparation and sample screening before experiments at large scale research infrastructure facilities. 

The in-situ SEM is a unique and cutting-edge advanced analytical technique to investigate microstructrutal properties. The technique can be used to explore new sustainable processes that will lead to a lower carbon footprint. 

Do you want to characterize a material regarding its thermal conductivity or thermal transport parameters at high temperatures? We can measure effective thermal conductivity up to 1 100 °C

Different fluids and pastes have different thermal conductivities at different temperatures. We perform thermal conductivity measurement on different fluids as well as oils, coolants, colloidal suspensions, aerogels, etc

For measuring instruments there are international recommendations, issued by OIML (International Organization of Legal Metrology). RISE is appointed as an Issuing Authority for a number of these recommendations and can in that role issue OIML certificates. An OIML certificate can be used in an appl…

There is currently a transition from fossil-based materials to products based on renewable materials. This transition has led to a need to control the proportion of a material that comes from renewable sources, i.e. is biogenic. We can offer C 14 / Carbon 14 analysis of various materials such as fu…

Combined torsional and axial (tensile & compression) loading capabilities with customized grips and clamps. Ideal machine for advanced packaging testing with complex load cases.

Calibration blocks, or moisture content blocks, are used to check moisture content meters.

Would you like to know more about the 3D-structure of your material on the micro- to centimeter scale? Would you like to peek into the inside of your product without destroying it or taking it apart? We offer non-destructive imaging through our lab-based X-ray microscope in 2D, 3D (tomography) and …

The National Laboratory for Length and Dimensional Metrology offers calibration and measurements of objects in a coordinate measuring machine.

RISE can offer internal pressure testing according to different standards or testing customized according to the client’s needs. The pump system available at RISE has a capacity of 2000 bar.

Fatigue testing is carried out with a cyclic load, until breakage occurs. The purpose is to determine the fatigue life and strength of a material or component. We perform both standardized and specialized fatigue testing on materials and components, for both machinery and products for construction …

We offer accredited calibrations on most of the air flow meters on the market (including gas clocks) in a flow range from 0.5 ml / minute up to 2.4 m³ / s, at atmospheric pressure. This range corresponds to mass flows between 0.01 mg / s and 2.9 kg / s.

By simultaneous assessment of calorimetric (energy flows) and gravimetric (mass changes) measurements we can characterize the response of a material when heated or exposed to different gases.  With our 'Simultaneous Thermal Analyzer' (STA F3 Jupiter) we conduct simultaneous differential scanni…

We provide accredited calibration of laboratory sieves according to ISO 3310-1 (metal wire cloth sieves) and ISO 3310-2 (perforated metal plate sieves). The calibration is carried out in our accredited laboratory in Borås, Sweden.

We measure thermal conductivity (i.e. heat conduction) using the Transient Plane Source (TPS) method according to ISO 22997-2 for which we are an accredited laboratory. The TPS method can be used to measure the thermal conductivity, diffusivity  and the specific heat capacity on solids, liquid…

Paper surface roughness plays a crucial role for printability and visual appearance. Several types of instruments are available topography measurements of paper surfaces in different degrees of detail. The FRT MicroProf instrument has the advantage of combining high resolution with a large scanning…

ATOS is an optical 3D-scanning system for non-contact measurement of details for digitisation and geometry analysis. The system enables conversion of three-dimensional surfaces to point clouds and after further processing to CAD models.

ARAMIS is a non-contact optical 3D measuring system. The system analyses, computes and documents object deformations, rigid body movements and the dynamic behavior of measuring objects. This type of measurement provides deformation data over entire surfaces unlike conventional strain gauges.

Atomic Force Microscopy (AFM) allows for studying nanoscale surface and interfacial properties of your product or application. For example, surface morphology, topography, nanomechanical surface properties, intermolecular and surface forces, adhesion, nanotribology i.e. friction, lubrication and w…

In our large climate chambers, we can expose products to a variety of climates. This is to verify function and service life.

The Laboratory for volume and flow offers calibration of density on solid objects, portable density meters, pycnometers and areometers.

The impulse excitation technique (IET) is a non-destructive material-characterization technique to determine the elastic properties and internal friction of a material up to 800 °C. It measures the resonant frequencies to calculate the Young's modulus, shear modulus, Poisson's ratio and internal fr…