IMO 2010 FTPC Part 10, Appendix 2 - Fire testing for ships
IMO 2010 FTP Code, Part 10 - Test for fire-restricting materials for high-speed craft
Appendix 2 - Fire test procedures for heat release, smoke production and mass loss rate for materials used for furniture and other components of high-speed craft
This service is also relevant in: Metrology, Fire safety, Materials and durability
Service details
- Service
- IMO 2010 FTPC Part 10, Appendix 2 - Fire testing for ships
- Delivery level
- Accredited
- Price
- Price on tender
- Preparations
Material needed for testing
Complete test
- 6 specimens with dimensions 100 mm x 100 mm x nominal thickness (max 50 mm).
Indicative test
- 2 specimens with dimensions 100 mm x 100 mm x nominal thickness (max 50 mm).
- Order
Before testing we ask you to complete the ”Order Specification form” and send this together with your order. Also attach product and safety data sheets when possible to below contact person.
Purpose
IMO 2010 FTP Code, Part 10 refes to ISO 5660-1 which is used to evaluate heat release rate, smoke production and time to ignition. The methods is used to classify and certify material in maritime and offshore applications.
ISO 5660-1 – Reaction-to-fire tests - Heat release, smoke production and mass loss rate, Part 1: Heat release rate (Cone calorimeter method) and smoke production rate (dynamic measurement).
Products and materials for maritime use is fire tested according to the International Maritime Organization (IMO) code, IMO 2010 FTP Code. The results from fire testing according to the FTP-code can be used as a basis for type approval (also called the wheel mark). Type approval is regulated in accordance with European Parliament Directive 2014/90/EU. RISE can perform the fire tests, issue the certificates and perform the production control required in order to gain the wheel mark.
Method
When testing a product according to ISO 5660-1, a sample with the dimension 100 mm x 100 mm is subjected to an irradiance level of 50 kW/m2. The surface of the sample is heated and starts to emit pyrolysis gases that ignite by an electric spark igniter. The emitted gases are collected in a hood and transported away through a ventilation system. The heat release is measured using the data on measured oxygen concentration in the emitted smoke.
The following parameters are measured: Time to ignition, heat release rate (kW/m2), total heat release (MJ/m2), and smoke production (m2/s).
Deliveries
A test report, in Swedish or English, is delivered with the test results after testing.