Menu
Close menu

Projects in automotive and future transport

Through research and development projects, RISE is driving forward the development of the vehicles of the future. From autonomous test systems and battery safety methods to EMC solutions and cyber security certification – this is where verification is created that will enable the industry's biggest transformation in more than a century.

Project / Circular transition

Setting Targets for the Circular Economy

Despite extensive and growing environmental legislation under the vision of a circular economy in Europe, Europe's resource use and its subsequent negative environmental effects are not decreasing. In this project, we investigate how environmental policy instruments can be designed to steer towards…
Project / Production and manufacturing

LaBoCa

The project focus is "Sustainable laser pretreatment and quality control for high performing bonding of cast aluminum"
Project / Production and manufacturing

SIMPL

Development of a new and unique simulation and robotic path planning tool for atmopsheric plasma processing.
Project

MAGIC

The project (MAGIC*) aims to provide the vehicle industry with tools in the form of processes, methods, and mechanisms to aid in forensics investigations, and support liability investigations.
Project / Cybersecurity

INTERSTICE

The changing landscape of connected vehicles presents major cybersecurity challenges. The project develops a system based on machine learning for intrusion detection in vehicle networks such as CAN and Automotive Ethernet. The system monitors and analyzes data traffic to quickly identify threats an…
Project / Plastics

ROPY2

The project develops methods, tools and guidelines for robust specification of surface texture to allow design and manufacture of automotive interior polymer components with larger material variations, thereby enabling circular material flow.
Project / Logistics

FEMAS

The FEMAS project will identify the obstacles that stand in the way of rolling out more efficient truck combinations with lower emissions and higher load capacity in Swedish construction and infrastructure projects
Project / Circular transition

The Circular Car

Transport accounts for almost a third of Sweden's greenhouse gas emissions and the car industry has ambitious targets to reduce the emissions. The project Circular Car project aims to support new and established actors in the work of jointly accelerating the circular transition of the automoti…
Project / Plastics

CIRCUS

Which plastic car parts can be reused, and which parts can be material recycled into new car parts in a safe and resource-efficient way? These are important questions for the automotive industry, questions that are addressed in the CIRCUS project. 
Project / Metrology

Dynamic force calibration

The project will develop technical competence and ability to measure dynamic force.
Project / Additive manufacturing

RELOW

Low series manufacturing of transmission components in low alloy steel by additive manufacturing and relevant post processes can contribute to increased circularity and resilience.
Project / Logistics

Systemeffects HCT first/last mile

The HCT Duo Demo project tests the use of longer vehicle combinations for transport on the route between Hallsberg and Örebro. The purpose is to investigate, among other things, the effects of using the longer vehicle crew regarding transport efficiency, transport costs and traffic safety.
Project / Hydrogen

TechForH2

TechForH2 is a new centre for excellence, built to create a Swedish ecosystem perfectly adapted to provide rapid advances in technology concerning transport solutions fuelled with hydrogen propulsion. The centre will contribute to knowledge building and education, and accelerate the introduction of…
Project / Casting

LivsVerk

The project LivsVerk aims to increase service life, reduce unplanned stops and increase remanufacturing of die casting tools. This is achieved by improving the surface of tools by developing the right surface properties in the right place. Routines and strategies for wear analysis, maintenance, rep…
Project / Mobility

HydroHaul

In Sweden, the first fuel cell electric heavy duty trucks are soon to be launched and the refueling infrastructure for hydrogen is being expanded. Is it therefore, in practice, profitable for haulage companies to offer transports fueled by hydrogen?
Project / Circular transition

Circular material palette

The Circular Material Palette: simplifying choices of more circular materials
Project / Metrology

Photonbased dynamic pressure measurement

RISE is working to develop measurements of dynamic processes. Dynamic calibration of pressure sensors is an area that is important for reducing measurement uncertainty in industry.
Project / Metrology

Traceability at high dynamic pressures

RISE has long been developing standards for measurements of dynamic processes. Dynamic calibration of pressure sensors is an area that is important for reducing measurement uncertainty, but traceability is lacking.
Project / Data Science

TESTOMATproject

TESTOMAT is a 3-year ITEA multinational research project with focus on test automation. Modern software teams seek a delicate balance between two opposing forces: striving for reliability versus agility. The TESTOMAT project will support software teams to strike the right balance by increasing the …
Project / Metrology

Knowledge platform Dynamic measurements

The knowledge platform for Dynamic measurements is a long-term investment where RISE, together with academia and industry, builds and spreads competence within measurement, calibration and traceability of fast mechanical processes.
Project

SVIS

The SVIS project took a holistic approach to a more sustainable production of vehicle interior components and involved suppliers from all relevant areas. The project aims was to create anoverall competence within the consortium around design for recycling and design with recycled materials, recycli…
Project / Digital infrastructure

IMMINENCE

Intelligent Management of next generation mobile networks, IMMINENCE, is a Celtic-Next project coordinated by Indra in Spain and involves companies from Austria, Poland, Portugal, Spain, Sweden and Turkey. The goal of Swedish part of IMMINENCE is to secure Sweden’s position as world leading in 5G a…
Project / Production and manufacturing

Cluster geometry and quality

The cluster for geometry and quality is one of eight clusters within the Swedish Production Cluster. The cluster focuses on research and development in geometry and quality assurance in product design and manufacturing.
Project / Production and manufacturing

Cluster for assembly

The cluster for assembly is one of eight clusters within the Swedish Manufacturing R&D Clusters. The cluster focuses on research and development within assembly of complex products.
Project / Production and manufacturing

Cluster for surface treatment and paint

The cluster for surface treatment and paint is one of eight clusters within the Swedish Manufacturing R&D Clusters. The cluster focuses on research and development in processes and materials for the next generation of surface treatment of vehicles with new combinations of materials.
Project / Production and manufacturing

Cluster forming and joining

The cluster for forming and joining is one of eight clusters within the Swedish Manufacturing R&D Clusters. The cluster focuses on research and development in forming and joining to meet the challenges of new and innovative materials.
Project / Production and manufacturing

Cluster component manufacturing

The cluster for component manufacturing is one of eight clusters within the Swedish Production Cluster. The cluster focuses on research and development in advanced manufacturing of components for the automotive industry.
Project / Sensors and sensor systems

CVD graphene detectors

This proposal aims to develop an effective infrared (IR) detection solution as gas sensors for automotive applications. Precision measurement of gases like CO2 and ethanol are vital for sustaining the competitiveness of Senseair AB (part of AKM group), the current world market leader for optical CO…
Project / Data Science

XIVT

XIVT (pronounced “shift”) is a 3-year ITEA3 project consisting of partners from Sweden, Germany, Canada, Turkey, and Portugal. Within the XIVT project, a method and toolchain will be defined for testing highly configurable, variant-rich embedded systems in the automotive, rail, telecommunication an…
Project / Artificial intelligence

IVVES

IVVES is a 3-year ITEA3 research project consisting of partners from Sweden, the Netherlands, Finland, Canada, and Spain. Targeting the challenges in verification and validation of AI and evolving systems, IVVES will systematically develop Artificial Intelligence approaches for robust and comprehen…
Project / Circular transition

Circular tyre project

This project builds knowledge about how the heavy vehicle tyre system in Sweden could become more circular and resource efficient. New service-based business models based on integrated sensor data and increased retreading activity, as well as new recycling technology are the underpins for the devel…